For those who want to make their own cable, here is the pinout of the connector
UPDATED: the previous diagram was wrong- this is definitely correct!
Microbee DIN Plug
Category Archives: Microbee
Gotek Disk Images
Here are the disk images I use for some of my vintage computers.
These are intended for use with the excellent HxC2001 firmware. The HFE format should work with the standard Gotek firmwre but I have not tried that personally.
Microbee – double sided 40 track
Kaypro IV – double sided 40 track
Kaypro II – single sided 40 track. Note that the Gotek will need to be configured to ignore the side select signal.
Buying a Microbee
I recently purchased a large cache of Microbee computers with the intent of refurbishing them and reselling to the retro computer community.
My original intent was to work my way through them, repair them as needed, and sell them onto the vintage community at cost.
I’ve done this for five or six systems, but I no longer have the time to invest in returning the remainder of the systems to fully working conditions.
I’m now offering seven Microbees in as is condition. All are tested and working. DRAM has passed a memory test, video is stable, and at least some of the keys on the keyboard are working
- Systems 1 through 4 are network clients, which means they have 64k of DRAM, and no floppy controller. An additionall 64k of RAM and floppy controller can be fitted but will require medium to high level soldering skills.
These systems are $350AUD each, plus shipping. I can include extra 64k of DRAM, floppy controller, 128k PAL, and 34 connector for an extra $50.
- Systems 5 through 7 are ROM systems. They have 32k of RAM, but cannot be upgraded to more RAM, nor can they have a floppy controller added. They would be suitable someone who wants a case for the new Microbee Classic Plus when it is available.
These systems are $275 each plus shipping.
The follow caveats apply:
- The cases have a variety of markings and some have stickers. These can be removed with some elbow grease and Windex.
- The cases and keyswitches may be yellowed from age or sun exposure.
- All cases are engraved with “Lisarow High School” in some manner. This can be sanded off, or the case can be refinished with a filling primer.
- The keyswitches will need cleaning, so not all keys may work correctly. You will need to clean then (excellent instructions from Ewan Wordsworth of Microbee Technology can be found here), or you can buy a full keyboard replacement kit from www.microbeetechnology.com.au
- The systems do NOT include a cable or power supply. These can be purchased from www.microbeetechnology.com.au
- None of these systems have colour boards fitted, nor are they Premium motherboards with the extra keys
